Hard water stains are one of the most annoying problems in any bathroom. Those cloudy spots on your shower doors, the white crusty buildup around faucets, and the spotty film on fixtures make everything look dirty, no matter how often you clean. These stubborn mineral deposits form when water evaporates and leaves behind calcium and magnesium residue. Columbus homeowners know this struggle well since our area has particularly hard water that creates these persistent stains.

You don’t need harsh chemicals or expensive products to tackle hard water stains on bathroom fixtures. Simple household items like white vinegar and baking soda work incredibly well at dissolving mineral buildup. With the right techniques and a bit of patience, you can restore your bathroom fixtures to their original shine and keep them looking clean longer.

What Are Hard Water Stains?

Hard water stains are the white, chalky marks and cloudy film that appear on bathroom surfaces after water dries. These stains happen because of minerals dissolved in your water supply, mainly calcium and magnesium. When water sits on surfaces or evaporates, it leaves these minerals behind as visible deposits.

The term “hard water” refers to water with high mineral content. As groundwater moves through soil and rock, it picks up calcium carbonate, magnesium, and other minerals along the way. The more minerals present in your water, the harder it is. Most tap water contains some level of these minerals, but the concentration varies significantly by location.

Columbus and Central Ohio have moderately hard to hard water, which means local homeowners deal with mineral buildup more frequently than people in soft water areas. These mineral deposits don’t just look bad. Over time, they can damage fixtures, clog showerheads, and create rough surfaces that attract more dirt and grime, making regular cleaning even more challenging.

How Hard Water Stains Form?

Hard water stains develop through a simple process that repeats every time water touches your bathroom surfaces and then dries or evaporates.

Water Evaporation Process: When water sits on surfaces like glass, tile, or metal, it eventually evaporates into the air. The minerals dissolved in the water cannot evaporate, so they stay behind.

Mineral Residue Left Behind: As the water disappears, calcium and magnesium crystallize on the surface. These minerals form the white, crusty deposits you see on faucets, shower doors, and other bathroom fixtures.

Repeated Exposure Creates Buildup: Each time water touches a surface and dries, another thin layer of minerals gets added. Over days and weeks, these layers accumulate into thick, stubborn hard water stains.

Heat Speeds Up Formation: Hot water from showers accelerates evaporation, which means mineral deposits form faster in bathrooms. Steam also spreads minerals to walls, ceilings, and surfaces far from direct water contact.

Soap Scum Combines with Minerals: Soap and shampoo residue mix with mineral deposits to create an even stickier, harder-to-remove film. This combination makes bathroom surfaces feel rough and look particularly cloudy or discolored.

Why Does Columbus Have Hard Water Issues?

Columbus and Central Ohio get their water supply primarily from underground aquifers and the Scioto River. As this water moves through limestone and other mineral-rich rock formations common in Ohio, it absorbs high levels of calcium and magnesium. This geological makeup is why our area naturally has hard water.

The water quality in Columbus falls into the moderately hard to hard category, with mineral content varying slightly by neighborhood and water source. While the water is safe to drink and meets all safety standards, the high mineral concentration causes noticeable buildup on bathroom fixtures, appliances, and plumbing throughout homes across the region.

Many Columbus homeowners notice hard water stains appearing quickly after cleaning, especially in bathrooms that get frequent use. Understanding that this is a widespread local issue, not just a problem with your home, helps explain why regular maintenance is so important for keeping fixtures clean.

Identifying Hard Water Stains

Recognizing hard water stains early makes removal much easier. These deposits have distinct characteristics that set them apart from regular dirt, soap scum, or other bathroom grime.

White Chalky Residue: The most obvious sign of hard water stains is white or gray crusty buildup that appears on faucets, showerheads, and around drains. This chalky residue feels rough to the touch and doesn’t wipe away with regular cleaning.

Cloudy Glass Surfaces: Shower doors and mirrors develop a foggy, cloudy film that makes the glass look dirty even after washing. This hazy appearance comes from layers of mineral deposits that build up over time and block the glass’s natural clarity.

Spotty Faucets and Fixtures: Chrome, brushed nickel, and other metal fixtures show water spots that look like white dots or rings. These spots appear wherever water drips or sits, especially around the base of faucets and on handles that get splashed frequently.

Rough Texture on Surfaces: Hard water stains create a gritty, sandpaper-like feel on bathroom surfaces that should be smooth. Running your hand over affected tiles, tubs, or sinks reveals this rough texture caused by crystallized mineral buildup that regular wiping doesn’t remove.

Discolored Grout Lines: Grout between tiles turns yellowish, brown, or shows white streaks from mineral deposits that soak into the porous material. These discolored grout lines stand out against clean tiles and indicate long-term hard water exposure that needs attention.

Essential Supplies for Hard Water Stain Removal

You probably already have most of what you need to remove hard water stains sitting in your kitchen or bathroom cabinet right now.

Natural Cleaning Solutions

These everyday household items are surprisingly effective at dissolving mineral deposits without harsh chemicals or strong fumes.

White Vinegar: The acetic acid in white vinegar breaks down calcium and magnesium deposits naturally. It’s safe for most surfaces and costs very little compared to commercial cleaners.

Baking Soda: This mild abrasive scrubs away stains without scratching surfaces. When mixed with water or vinegar, it creates a powerful paste that tackles stubborn mineral buildup effectively.

Lemon Juice: Fresh lemon juice contains citric acid that dissolves hard water stains naturally. It also leaves behind a fresh, clean scent instead of chemical odors common with other cleaners.

Salt: Salt adds extra scrubbing power when combined with other natural cleaners. Its coarse texture helps remove stubborn deposits while being gentle enough for most bathroom surfaces.

Dish Soap: A few drops of regular dish soap cut through soap scum and grease that often mix with mineral deposits. It helps other cleaners work better and rinse away cleanly.

Commercial Products

For severe hard water stains or when natural methods need a boost, these commercial products deliver stronger results with specialized formulas.

CLR (Calcium Lime Rust Remover): This powerful commercial cleaner specifically targets calcium, lime, and rust stains. It works faster than natural options but requires careful use and proper ventilation during application.

Lime-A-Way: Designed specifically for hard water deposits, this product dissolves mineral buildup quickly. It’s particularly effective on toilet bowls, tubs, and sinks with heavy staining.

Bar Keeper’s Friend: This oxalic acid-based powder works wonders on porcelain, stainless steel, and chrome fixtures. It removes tough stains while polishing surfaces to their original shine.

Commercial Descalers: These specialized products contain strong acids formulated to dissolve mineral buildup. They’re ideal for severe cases where natural cleaners haven’t worked but require careful handling.

Acidic Cleaners: Products containing phosphoric or hydrochloric acid provide industrial-strength cleaning power. Use these only for extremely stubborn stains and always follow safety instructions carefully.

Tools and Equipment

Having the right tools makes hard water stain removal much easier and protects your surfaces from damage during the cleaning process.

Microfiber Cloths: These soft cloths clean and polish without scratching delicate surfaces like glass and chrome. They’re also highly absorbent, making them perfect for drying fixtures after cleaning.

Scrub Brushes: Soft-bristled brushes reach into corners and crevices where stains hide. Choose brushes with nylon bristles that won’t scratch porcelain, tile, or other bathroom surfaces.

Spray Bottles: Empty spray bottles let you mix and apply homemade cleaning solutions evenly. They’re essential for treating large areas like shower doors and tile walls efficiently.

Pumice Stone: This natural volcanic rock gently scrubs away stubborn mineral deposits on porcelain and glass. Always keep it wet during use to prevent scratching surfaces.

Magic Eraser: These melamine foam sponges work like fine sandpaper to remove stains without chemicals. They’re excellent for light hard water deposits on various bathroom surfaces.

Squeegee: A good squeegee removes water from shower doors and walls after each use. This simple tool prevents new hard water stains from forming in the first place.

Old Toothbrush: Small brushes reach tight spaces around faucet bases, grout lines, and fixture details. Keep a dedicated toothbrush for cleaning that reaches where larger tools cannot.

Step-by-Step: Removing Hard Water Stains from Different Fixtures

Each bathroom surface requires a slightly different approach to safely remove hard water stains without causing damage to the material or finish.

Glass Shower Doors

Glass shower doors show every water spot and mineral deposit, making them one of the most frustrating surfaces to keep clean.

Cleaning Steps:

• Wipe away loose soap scum and debris with a damp cloth before applying any cleaning solution to the glass surface.
• Spray white vinegar solution generously over the entire glass door, making sure to cover all cloudy areas and visible water spots completely.
• Let the vinegar solution sit on the glass for 15 to 20 minutes to dissolve the mineral deposits without scrubbing or wiping.
• Scrub the glass gently with a non-abrasive pad or soft sponge using circular motions to lift the loosened mineral buildup.
• Rinse the glass thoroughly with warm water to remove all vinegar and dissolved minerals, checking for any remaining cloudy spots.
• Dry the glass immediately with a squeegee or clean microfiber cloth to prevent new water spots from forming as it air dries.
• For stubborn stains that remain, make a thick paste using baking soda and a small amount of water for extra scrubbing power.
• Apply the baking soda paste directly to problem areas and let it sit for 10 minutes before scrubbing with a soft cloth.
• Use a wet pumice stone very gently on glass only for extremely stubborn deposits, keeping both the stone and glass wet throughout.
• Buff the entire glass door to a crystal-clear shine using a dry microfiber cloth and check for any missed spots.

Faucets and Fixtures

Faucets and fixtures need careful cleaning because different finishes require different treatment methods to avoid damage while removing mineral deposits.

Cleaning Steps:

• Identify your fixture material before cleaning, since chrome, brushed nickel, oil-rubbed bronze, and brass all need different care levels.
• Soak a soft cloth or paper towel in white vinegar and wrap it completely around the faucet, covering all stained areas.
• Let the vinegar-soaked cloth sit for 30 minutes to 1 hour, rewetting it occasionally if it starts to dry out completely.
• For aerators at the faucet tip, unscrew them carefully and soak separately in a cup of vinegar to remove internal mineral clogs.
• Scrub the faucet gently with a soft brush or old toothbrush, paying special attention to crevices and details where minerals accumulate.
• Rinse the entire faucet thoroughly with clean water to remove all vinegar and loosened mineral deposits from every surface.
• Dry the faucet completely with a soft cloth to prevent new water spots from forming immediately after your cleaning effort.
• Polish chrome fixtures with a dry microfiber cloth to restore their original shine and remove any remaining streaks or fingerprints.
• Avoid using abrasive cleaners, steel wool, or harsh chemicals on special finishes like brushed nickel or oil-rubbed bronze fixtures.

Showerheads

Mineral buildup inside showerheads reduces water pressure and creates uneven spray patterns, but soaking dissolves these clogs without disassembly.

Cleaning Steps:

• Fill a plastic sandwich bag or small plastic bag with enough white vinegar to completely submerge the showerhead when attached.
• Secure the vinegar-filled bag over the showerhead using a rubber band or twist tie, making sure the head is fully immersed.
• Let the showerhead soak overnight or for a minimum of 4 hours to allow the vinegar to dissolve stubborn mineral deposits inside.
• Remove the bag carefully and immediately run hot water through the showerhead for several minutes to flush out loosened minerals.
• Scrub the exterior and spray nozzles with an old toothbrush to remove any remaining visible mineral deposits or crusty buildup.
• Use a pin, toothpick, or needle to clear individual spray holes that remain clogged after soaking and scrubbing the showerhead.
• Wipe the entire showerhead exterior with a damp cloth to remove any vinegar residue and restore its clean, polished appearance.
• Test the water pressure and spray pattern to confirm all mineral clogs are gone, and full water flow is restored.

Bathroom Tiles and Grout

Tiles collect mineral deposits on their surface, but grout lines absorb stains deep into the porous material, requiring extra attention.

Cleaning Steps:

• Spray all tiles generously with a vinegar and water solution, making sure to cover both the tile surface and grout lines.
• Let the vinegar solution sit for 10 to 15 minutes to break down mineral deposits without any scrubbing or wiping yet.
• Scrub the tiles using a soft-bristled brush in circular motions to lift mineral deposits without scratching the tile surface or glaze.
• Focus extra attention on grout lines with an old toothbrush or small grout brush, scrubbing back and forth along the lines.
• Make a thick baking soda paste by mixing baking soda with just enough water for stubborn grout stains that vinegar alone won’t remove.
• Apply the baking soda paste directly to discolored grout lines and let it sit for 15 minutes to penetrate deep stains.
• Scrub the grout thoroughly with your toothbrush or grout brush, applying firm pressure to lift embedded mineral deposits and discoloration.
• Rinse the entire tiled area with clean water, wiping down with a damp cloth to remove all cleaning solution and loosened minerals.
• Dry the tiles and grout with a towel or cloth to prevent new water spots from forming on freshly cleaned surfaces.
• Consider applying a grout sealer after cleaning and drying to protect porous grout from absorbing future mineral deposits and stains.

Bathtub and Sink

Bathtubs and sinks develop rings at the waterline and mineral stains in the basin that need gentle but effective cleaning methods.

Cleaning Steps:

• Wet the entire bathtub or sink surface with warm water first to help cleaning products spread evenly and work more effectively.
• Sprinkle baking soda generously over all stained areas, paying special attention to the waterline and areas with visible mineral buildup.
• Spray white vinegar over the baking soda, which will fizz and bubble as the chemical reaction helps break down hard water deposits.
• Let the fizzing mixture work for 15 to 20 minutes, keeping the surface wet by adding more vinegar if it starts drying.
• Scrub the entire surface with a non-abrasive sponge using gentle circular motions to lift mineral deposits without damaging the finish.
• Pay extra attention to waterline stains where minerals concentrate most heavily, scrubbing these areas more thoroughly than other spots.
• For porcelain surfaces, use gentle circular motions and avoid abrasive scrubbers that can dull the glossy finish or create scratches.
• Rinse the bathtub or sink thoroughly with warm water, making sure to remove all baking soda residue and dissolved mineral deposits.
• Dry the surface completely with a towel to see the full results of your cleaning and check for any spots needing retreatment.
• Repeat the entire process for severe stains that don’t come clean the first time, as heavily built-up deposits may need multiple treatments.

Toilet Bowl

Toilet bowls develop mineral rings at the waterline and throughout the bowl that require soaking and scrubbing to remove completely.

Cleaning Steps:

• Pour 2 to 3 cups of white vinegar directly into the toilet bowl, making sure it covers the waterline and stained areas.
• Let the vinegar sit for several hours or overnight for best results, allowing time for the acid to dissolve stubborn mineral deposits.
• Sprinkle baking soda around the inside of the bowl, especially on visible stains and along the waterline where minerals accumulate most.
• Scrub the entire bowl thoroughly with a toilet brush, focusing on the waterline and any visible rings or mineral deposit stains.
• For stubborn ring stains, use a wet pumice stone gently on porcelain only, keeping both the stone and surface wet at all times.
• Flush the toilet to rinse away all loosened minerals, vinegar, and baking soda residue, checking to see if stains remain visible.
• Repeat the vinegar and baking soda treatment if stains are still present, as heavy buildup often requires multiple cleaning sessions.
• Clean the toilet exterior with an all-purpose spray cleaner and cloth, wiping down the tank, lid, seat, and base completely.

Best DIY Cleaning Solutions for Hard Water Stains

Homemade cleaning solutions work just as well as expensive commercial products for most hard water stains, saving you money while using safer ingredients.

Recipe 1: Basic Vinegar Spray

Ingredients:

• 1 cup white vinegar
• 1 cup water
• Empty spray bottle

Instructions:

• Mix equal parts white vinegar and water in a clean spray bottle, shaking well to combine the solution thoroughly.
• Spray the mixture generously on any hard water-stained surface and let it sit for 10 to 15 minutes.
• Wipe clean with a microfiber cloth or soft sponge, then rinse with water and dry the surface completely.

Best for: Daily maintenance on glass shower doors, faucets, and tile surfaces with light to moderate mineral buildup.

Recipe 2: Heavy-Duty Vinegar and Baking Soda

Ingredients:

• 1/2 cup baking soda
• White vinegar (as needed)
• Small bowl for mixing

Instructions:

• Add enough white vinegar to the baking soda to create a thick paste consistency that spreads easily but doesn’t run.
• Apply the paste directly to stubborn hard water stains and let it sit for 15 to 30 minutes without wiping.
• Scrub with a soft brush or sponge, rinse thoroughly with warm water, and dry the surface with a clean cloth.

Best for: Tough mineral deposits on bathtubs, sinks, toilet bowls, and grout lines that need extra scrubbing power beyond regular spray cleaners.

Recipe 3: Lemon Juice Solution

Ingredients:

• 1/2 cup fresh lemon juice
• 1/2 cup water
• Spray bottle

Instructions:

• Combine fresh lemon juice with water in a spray bottle and shake well to mix the natural citric acid solution.
• Spray on hard water stains, let sit for 10 minutes, then scrub gently with a soft cloth or sponge.
• Rinse thoroughly with clean water and buff dry for a streak-free, fresh-smelling finish on all treated surfaces.

Best for: Light hard water stains on chrome fixtures and glass surfaces, where you want natural cleaning power with a pleasant citrus scent.

Recipe 4: Commercial Descaler Method

Product Recommendations:

• CLR (Calcium Lime Rust)
• Lime-A-Way
• Bar Keeper’s Friend

Instructions:

• Follow manufacturer directions carefully, usually applying the product directly to stains and letting it sit for the recommended time.
• Scrub gently with a soft brush or cloth, working the product into stubborn deposits without using excessive force.
• Rinse extremely thoroughly with plenty of water to remove all chemical residue, then dry surfaces completely.

Best for: Severe hard water stains and heavy mineral buildup that natural cleaners cannot remove, especially on porcelain toilets and bathtubs.

Safety Notes: Always wear gloves, ensure good ventilation, never mix with other cleaners, and keep away from children and pets.

Pro Tips from Professional Cleaners

Professional cleaners have developed techniques through years of experience that make hard water stain removal faster, easier, and more effective.

Test Cleaners on Hidden Areas First: Always try your cleaning solution on a small, hidden spot before treating visible areas. This prevents accidental damage to finishes and helps you adjust the strength if needed.

Let Acidic Cleaners Dwell Properly: Don’t rush the cleaning process by wiping too soon. Vinegar and other acidic cleaners need 10 to 30 minutes to break down minerals chemically, reducing the scrubbing required.

Use Distilled Water for Final Rinse: Rinse cleaned surfaces with distilled water instead of tap water when possible. This prevents new mineral deposits from forming immediately and gives you truly spot-free results.

Work in Sections for Large Areas: Clean shower walls and large tiled areas in small sections rather than all at once. This keeps cleaners from drying before you wipe them and ensures thorough coverage.

Prevent While Cleaning with a Squeegee: Keep a squeegee in your shower and use it after every bath or shower. This simple habit removes water before minerals can settle and dramatically reduces future buildup.

Know When to Use Stronger Products: Start with natural cleaners like vinegar and only move to commercial products if needed. Harsh chemicals aren’t always necessary and can damage some bathroom finishes unnecessarily.

CBUC Cleaning’s Professional Approach: At CBUC Cleaning, we use commercial-grade descalers and specialized tools for severe hard water buildup that home methods can’t handle. Our deep cleaning services restore bathrooms to like-new condition throughout Columbus.

Common Mistakes to Avoid When Cleaning Bathroom Fixtures

Even with good intentions, certain cleaning mistakes can damage your bathroom fixtures or make hard water stains even harder to remove later.

Using Abrasive Scrubbers on Glass

Steel wool, rough scrub pads, and abrasive sponges create tiny scratches in glass shower doors and mirrors. These scratches trap more minerals over time, making surfaces progressively cloudier and harder to clean.

The microscopic damage also ruins the smooth surface, causing water and soap to stick more easily. Always use soft cloths, non-abrasive sponges, or specialized glass cleaning pads on any glass bathroom surface.

Mixing Vinegar with Bleach

Combining vinegar with bleach creates toxic chlorine gas that can cause serious respiratory damage, eye irritation, and other health problems. This dangerous chemical reaction happens quickly and releases fumes even in small amounts. Many people don’t realize that these common cleaning products become hazardous when mixed.

Never use vinegar and bleach together or even one right after the other without thoroughly rinsing the surface between applications.

Not Rinsing Completely

Leaving cleaning product residue on bathroom surfaces creates a sticky film that actually attracts more dirt, soap scum, and mineral deposits. Vinegar and commercial cleaners can also leave streaks or white film if not rinsed thoroughly with clean water.

Residual cleaner can damage some finishes over time through prolonged contact. Always rinse surfaces completely with water and dry them thoroughly after cleaning to see the true results.

Scrubbing Too Hard on Chrome

Aggressive scrubbing with too much pressure can scratch chrome plating and special finishes like brushed nickel or oil-rubbed bronze. Once these protective coatings are damaged, they become even more prone to mineral buildup and corrosion.

The scratches also give surfaces a dull, worn appearance that no amount of cleaning can fix. Use gentle pressure and let your cleaning solution do most of the work instead of relying on scrubbing force.

Leaving Cleaners Too Long

While cleaners need time to work, leaving acidic products like vinegar or commercial descalers on surfaces for hours can etch or discolor them. This is especially true for natural stone, certain metals, and older fixtures with worn finishes.

What starts as cleaning can turn into permanent damage if products sit too long. Follow recommended dwell times carefully and set a timer to remind yourself to rinse surfaces.

Ignoring Manufacturer Guidelines

Bathroom fixtures often have specific cleaning instructions from manufacturers that protect warranties and finishes. Certain materials like natural stone, unsealed grout, or special metal finishes require particular products and methods.

Using the wrong cleaner can void warranties, damage surfaces, or create problems that cost hundreds to repair. Always check manufacturer instructions for expensive fixtures before trying new cleaning products or methods.

Preventing Hard Water Stains

Stopping hard water stains before they form is much easier than removing heavy buildup that’s been accumulating for weeks or months.

Squeegee After Every Shower: Wipe down glass doors and tile walls with a squeegee immediately after showering while surfaces are still wet. This removes water before minerals can settle and takes only 30 seconds each time.

Wipe Down Fixtures Daily: Use a dry cloth to wipe faucets, showerheads, and handles after each use. This quick daily habit prevents water spots from forming and keeps chrome fixtures looking polished and clean.

Install Water Softener System: A whole-house water softener removes minerals before they reach your fixtures. This investment protects your entire plumbing system while virtually eliminating hard water stains throughout your home permanently.

Use Daily Shower Spray: Apply a daily shower spray product after each use to prevent soap scum and mineral buildup. These products work while you’re away and reduce the frequency of deep cleaning sessions significantly.

Improve Bathroom Ventilation: Run exhaust fans during showers and for 20 minutes afterward to remove moisture-laden air. Better ventilation means less water sitting on surfaces and fewer opportunities for mineral deposits to form.

Apply Protective Coatings: Treat glass shower doors with water-repellent products that make water bead and roll off. These coatings create an invisible barrier that prevents minerals from bonding to glass, tile, and other bathroom surfaces.

Regular Weekly Maintenance: Spray vinegar solution on shower doors and fixtures once a week, even when they look clean. This preventive cleaning dissolves minerals before they build up into stubborn stains requiring serious scrubbing.

When to Call Professional Cleaners for Cleaning Bathroom Fixtures

Sometimes, hard water buildup becomes so severe that home cleaning methods simply can’t restore your bathroom fixtures to their original condition. If you’ve tried multiple products and spent hours scrubbing but still see cloudy glass, crusty faucets, or stained grout, professional help might be necessary. Years of accumulated mineral deposits often require commercial-grade descalers and professional equipment that most homeowners don’t have.

At CBUC Cleaning, we tackle the toughest hard water stains that regular cleaning can’t fix. Our team uses professional-strength products specifically designed for mineral removal, along with specialized tools and proven deep cleaning techniques. We clean every bathroom surface thoroughly, including hard-to-reach areas behind toilets, inside showerhead mechanisms, and grout lines that trap minerals deep below the surface.

Our deep cleaning services are perfect for homeowners dealing with stubborn bathroom buildup or anyone preparing to sell their home. We also provide comprehensive move-in and move-out cleaning services throughout Columbus, ensuring bathrooms are completely descaled and spotless for new occupants. Whether you need a one-time deep clean or regular maintenance, we have the experience and equipment to deliver results.

If hard water stains are taking over your bathroom despite your best efforts, contact CBUC Cleaning for professional bathroom cleaning services that truly make a difference.

Conclusion

Removing hard water stains from bathroom fixtures doesn’t require expensive products or professional help in most cases. With white vinegar, baking soda, and the right techniques, you can restore your shower doors, faucets, and tiles to their original shine. The key is giving cleaners enough time to dissolve minerals, using appropriate tools for each surface, and staying consistent with your cleaning routine.

Prevention makes the biggest difference in keeping hard water stains under control. Daily squeegee use, weekly vinegar treatments, and proper ventilation stop minerals from building up in the first place. When buildup becomes overwhelming, or you need a completely fresh start, CBUC Cleaning provides professional deep cleaning services throughout Columbus. Contact us today to schedule a bathroom cleaning that tackles even the most stubborn hard water stains.